Product name: Zero drop tester

Item model number: HS-LDL-150

Product introduction:

      This test bench is mainly used to evaluate the impact degree of the package in the actual transportation, loading and unloading process, and evaluate the impact resistance strength of the package during the transportation process and the rationality of the package design.

control method:

      The zero-drop tester is mainly used for the drop test of larger packages. The zero-drop tester uses an "E"-shaped fork that can move down quickly as the specimen bracket. Place balance. During the test, the pallet moves downward at a high speed and is separated from the test piece. The "E" fork falls to the bottom plate when the tested packaged goods are embedded in the bottom plate under the action of the high-efficiency shock absorber. In theory, the zero drop test is performed. The drop test can be performed from the zero height range, the drop height can be digitally set through the test requirements, and the drop test, large packaged goods and test pieces can be automatically performed according to the set height.

Technical parameters of zero drop tester:

1. Load: 200KG

2. The maximum size of the test specimen: 1.4 × 1.2 × 1.0 meters

3. Arm impact acceleration: 18G

4. Test height: 0～1500mm can be set arbitrarily and can be adjusted

5. Controller: LCD display controller

6. Test aspects: all-round drop of edges, corners and faces

7. Drive mode: motor drive

8. Protection device: upper and lower limit protection

9. Drop plate material: 45# steel plate Thickness: 30mm

10. Drop plate size: 140×160×3cm (width×length×height)

11. Arm structure: "E" type arm, 45# square steel

12. Transmission components: imported linear sliders and copper guide bushes, 45# chrome steel

13. Acceleration mode: pneumatic acceleration device

14. Drop method: electromagnetic and pneumatic comprehensive cooperation

15. Weight: about 1500KG

16. Power supply: 380V 50HZ 4KW