Insertion force testing machine
product description:
The plug-in force tester is suitable for the insertion force and pull-out force test of various connectors. With the patented automatic centering device, a completely accurate plug-in force test can be obtained. Using WINDOWS, the Chinese screen of the window is set, and the operation is simple. Convenient, and all data can be stored (test conditions, displacement curves, life curves, inspection reports, etc.)
technical parameter:
1. Determine the maximum load: 50, 20, 5, 2kg
2. Minimum decomposition degree: 0.01kg or 1g
3. Maximum test height: 150mm
4. Minimum fine-tuning distance: 0.01mm
5. Measuring speed range: 0~200mm/min
6. X, Y axis moving range: 0~75mm
7. Transmission mechanism: ball screw
8. Drive motor: servo motor
9. Appearance size: 360×260×940mm
10. Weight: 67kg (machine)
11. Power supply: AC 220V
Features of plug-in force testing machine:
Solve the problem of fixtures for various connector tests, and the male and female connectors can be automatically aligned during testing, and there will be no problem of misalignment.
Test items:
1. Connector single-hole plug-in test
2. Connector plug-in test
3. Connector plug-in life test
4. Connector single pin and plastic retention force test
5. Connector NORMAL FORCE test
6. General compression, tensile failure test
7. Can be connected to the contact impedance machine at the same time (optional)
testing software:
A. Printable storage graphics (plug displacement curve, life curve, inspection report)
B. The test data is stored on the hard disk (every data can be stored, unlimited times)
C. The test conditions are all set by the computer screen, which is convenient and fast (including plug-in stroke, speed, pause time, etc.)
D. The inspection report can be transferred to EXCEL for editing
Standard equipment:
1) Test machine
2) Control system (industrial computer and control interface, monitor, printer) Window system plug-in control operation software
3) Load cell
4) X-Y mobile station
5) Automatic position correction device for the entire row of connectors.
6) Position automatic correction device for single connector.
7) Fixtures for the entire row of connectors
8) Fixture for single connector
9) A set of clamping nozzles
Choose to purchase accessories:
1) Micro-ohm testing machine and use software, connect GPTB interface card.
2) Groove milling machine and its special gripper (special gripper and long gripper for easy-to-change plastic connectors)
3) Special fixture for single pin and plastic holding force
浙公網(wǎng)安備 33028202001045號
